Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

955-0116_V6.1, REV-E | 38

USE A TRIPOD OR MONOPOD

This section describes the WEAPON mounting points and mounting equipment for use with a tripod or monopod.

The WEAPON is equipped with two (2) 3/8-16 mounting holes and one (1) 1/4-20 mounting hole on the bottom

of the BRAIN. These mounting points are designed for use with a variety of mounting plates and hardware, to

support tripods and other support systems.

WARNING: Ensure that the tripod, monopod, or support system is designed and rated to handle the weight

of your WEAPON configuration. RED is not responsible for any damage caused by using a tripod, monopod,

mount, or support system that does not provide sufficient support.

WARNING: DO NOT use excessive force to mount a support accessory, as this may damage the screw threading.

RED offers the following products for use with tripods and other support systems:

ITEM PART NUMBER

Mounting Plate (DSMC) 790-0094

DSMC Quick Release Platform Pack 790-0183

Quick Release Platform Pack (Bolt-On) 790-0078

Quick Release Platform (Dovetail) 790-0079

Quick Release Platform (Mini) 790-0390

Dovetail Mounting Plate (Long) 790-0083

Dovetail Mounting Plate (Short) 790-0084

For more information, visit the RED store at www.red.com/store.

VIDEO MONITOR OUTPUTS

NOTE: HD-SDI and HDMI

ports are only available on select WEAPON expanders. For more information, go to

“Input/Output Connectors” on page 161.

The monitoring path converts RAW sensor data to a white balanced 12-bit depth 1920 x 1080 pixel RGB 4:4:4

video signal. The signal may be modified using ISO, White Balance, or other RGB color space adjustments. The

signal is then scaled and gamma-corrected to provide monitor outputs at 10-bit depth in 4:2:2 YCC or 8-bit

depth in 4:4:4 RGB.

The camera offers the following monitor outputs:

 EVF/LCD: Supports a RED EVF or LCD display.

 HD-SDI: Provides a 720p or 1080p output suitable for monitoring or recording to an external VTR or DDR

device. It may be configured for 10-bit LIN (VIDEO) or 10-bit LOG (FILM) encoded data.

 HDMI: Provides a 480p, 720p, or 1080p output suitable for monitoring via a Windows

monitor or most

HDTVs.