Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

955-0116_V6.1, REV-E | 127

OVERVIEW

The built–in stereo microphones and speaker allow for easy audio capture and playback.

Additional audio input/output options are determined by the attached port expander. For more information

about the ports on each expander, go to “Input/Output Connectors” on page 161.

The WEAPON

can record up to four (4) discrete stereo channels of uncompressed 24-bit, 48 KHz audio.

Input signals are routed via a high-quality pre-amplifier and soft clip analog limiter (the limiter is optional) to

achieve the desired recording levels and maximize dynamic range.

Audio data is synchronized with video and timecode and embedded in the R3D

file. You can export audio data

from REDCINE-X PRO

as separate audio files.

Audio is also embedded in any HD-SDI and HDMI

output connected to the DSMC BRAIN

SET UP AUDIO

To set up audio, go to Menu > Settings > Audio. To adjust the input, pre-amplifier, and headphone settings,

select Control. To adjust the mix settings, select Mix.

CONTROL

To adjust the input, pre-amplifier, and headphone settings, select Control.

RECORD AND

MONITOR AUDIO