Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

955-0116_V6.1, REV-E | 120

RACK FOCUS

Use the Rack tab to configure up to four (4) focus points and execute rack focus between them.

SET UP RACK FOCUS

1. Ensure that a DSMC Nikon Mount, DSMC Canon Mount, or DSMC Canon MOTION MOUNT is installed and

that a supported lens is attached to the BRAIN.

2. Go to Menu > Focus > Mode.

3. Select Rack from the Mode drop-down menu.

Spot is automatically selected from the Zone drop-down menu, since rack focus only works with Spot zone.

4. Select a size from the Size drop-down menu.

5. Go to the Rack tab.

6. Use the Rack Speed slider to change the speed at which the lens moves. Move the slider to the left for a

slower speed, and to the right for a faster speed.

7. Select the number of rack points (1–4) from the Rack Points drop-down menu.

8. To reset the focus distance to the value calculated by the autofocus algorithm, select Re-Autofocus.