Operation Manual

RED DSMC OPERATION GUIDE: WEAPON

POST RECORD DELAY

Select the amount of time that it takes for the bottom fan to switch from record to preview mode.

LENS

LENS TAB

The options displayed on the Lens tab change based on the attached lens mount.

PL MOUNT

 Enable Power to Lens: Ensures that the BRAIN powers the lens via the lens mount. This feature is enabled by

default, but the camera saves the last selected setting. Deselect when using a Fujinon

T2.9 Cabrio Premier

PL lens. If you disable this feature for the Fujinon Cabrio, re-enable it when using other lenses. For more

information, go to “Fujinon T2.9 Cabrio Premier PL Lenses” on page 174.

 Auto-Detect PL Lenses: By default, this feature is enabled.

 Detect Lens: Detects a lens, if one is attached.

CANON AND NIKON LENS SETTINGS

The options below display when a DSMC Nikon Mount or DSMC Canon Mount is installed with a supported

lens.

 Aperture: Enter the aperture value. The range and default depend on the lens.

 Focus: Enter the focal distance. The default value is the value from the lens. The range depends on the lens.

MOTION MOUNT TAB

The Motion Mount menu is only accessible when a DSMC RED MOTION MOUNTis installed. For more information,

see the RED MOTION MOUNT Operation Guide, available at www.red.com/downloads.

MOTOR CONTROL

Use the Motor Control menu to set up the RED 3-Axis Lens Control System. For more information, see the RED

3-Axis Lens Control System Operation Guide, available at www.red.com/downloads.

MAINTENANCE

The Maintenance menu includes: Save Log, Upgrade, Calibrate, Self Test, Restore System, Rediscover, System

Status, and OLPF.