Operation Manual

RED SCARLET-X OPERATION GUIDE

955-0003_v4.0, Rev-A | 26

NAVIGATION GROUP

Side Handle Navigation Group

A. Scroll Wheel

B. Direction Keys

C. Enter Button

Scroll Wheel

Selects and adjusts camera parameter value

Direction Keys

Navigates camera menus and may select parameter for adjustment

Enter Button

Confirms selected parameter value adjustment

INSTALLATION / REMOVAL

WARNING: The Side Handle is NOT hot swappable - meaning you cannot remove or install while the camera

is powered on. Before installing or removing the Side HANDLE, you MUST power down the camera. Failure

to do so may result in damage to the Side Handle and / or camera brain that is not covered by warranty.

To install the side handle:

Power down the camera if necessary.

Remove the brain side plate (if installed) by removing the single screw located at the bottom.

Rotate upwards to disengage lip at top of side plate from camera brain.

Remove Screw and Rotate Side Plate Upwards to Remove

Insert the lip at the top of the side handle into the area where the lip from the side plate was installed.