Operation Manual

MENU CONTROLS

Displayed in the Upper Display Group of the VIEWFINDER output(s), are FRAMERATE (FPS), EXPOSURE

(ISO), _._ (F/Stop), WHITE BALANCE, RESOLUTION, and QUALITY (REDCODE). These parameters are

adjustable directly through this screen. When using the touchscreen, directly to the right of these

parameters is the MENU icon which when pressed will take you to the secondary camera set up

menus.

ADJUSTMENTS

BASIC SETTING ADJUSTMENTS

SIDE HANDLE / REDMOTE

• The MENU button can be used to ENTER the secondary menus, as well as CANCEL inside lists and

for navigating back up menus.

• Navigate to the desired setting using the NAVIGATION GROUP direction keys and press ENTER.

• Use the Scroll Wheel or Adjustment Ring to increase or decrease the parameter value.

• When the desired value has been selected, press ENTER to set.

BASIC ADJUSTMENTS USING SIDE HANDLE ONLY

Although not recommended, the Side Handle can be used stand alone to make basic adjustments to FPS,

ISO, Shutter Speed, Resolution and REDCODE located on the Main Menu screen. Use the Navigation

Group to make these adjustments while watching the cursor placement under the desired setting on the

side handle LCD. When desired setting is selected, press the Enter button to access, then use the Scroll

Wheel, Directional Pad or Adjustment Ring to make changes. When done, press the Enter button again to

set the changed parameter. The MENU button can be used to ENTER the secondary menus, as well as

CANCEL inside lists and for navigating back up menus.

TOUCHSCREEN

• The MENU ICON can be used to ENTER the secondary menus, as well as CANCEL inside lists and for

navigating back up menus.

• Touch the desired parameter for adjustment.

• Slide your finger across the screen to scroll through the available parameter values.

• When desired the parameter value has been selected, touch anywhere in the screen area to set.