Operation Manual
COPYRIGHT © 2012 RED Digital Cinema 955-0003_v3.2, Rev-A1
132
SYNC MODE
Allows the shutter timing (scan start) to be synced to an external signal.
Available options are OFF, GENLOCK, SHUTTER, INTERNAL, PROXY, and SLAVE. Default is Off.
OFF – Shutter start time is defined by internal camera timing.
GENLOCK – Shutter start time is slaved to an external RS170A tri-level sync signal .a.k.a. “Genlock”.
SHUTTER – Shutter start time is slaved to an external Shutter Sync signal.
INTERNAL – Not implemented at this time.
PROXY – Not implemented at this time.
SLAVE – Not implemented at this time.
IMPORTANT: If Sync > Genlock mode is selected, DO NOT set fps to higher than 72fps, and to a
speed NOT a multiple of the project base rate and genlock input.










