Operation Manual

Version 2.0.5R1
©2011 RED.COM INC. DECEMBER 20, 2011
88 88
ZEBRA
Zebras enable and adjust the upper and lower values for two independent Zebra indicators. One zebra
may be used for highlight exposure, and the other for mid tone or shadows. Zebras will be visible when
in 1:1 zoom. By default, Zebra 1 and 2 are disabled.
ZEBRA 1
To enable, select ZEBRA 1 check box. Areas of the image exposed within these ranges will be indicated
by crosshatched overlays at - 45 degrees relative to vertical. Zebra 1 is shown in the image below.
High IRE
Change the desired setting between 93 and 109 (default is 108).
Low IRE
Change the desired setting between 75 and 107 (default is 99).