Operation Manual

Version 2.0.5R1

You will then be asked if you want to apply the imported preset.

If No is selected, the preset will be imported and listed in the available Camera Presets.

If Yes is selected, “Preset Applied Successfully” will appear when successfully completed. The preset

will be listed in the available Camera Presets.

If the preset could not be applied, “Preset Could Not Be Applied” will appear to inform you. Try to set

again.

RMD PRESETS

If an RMD file exported from REDCINE-X or REDCINE-X PRO is on the SSD it can be imported from the

SSD to the camera. When APPLY is selected, the RMD file is transferred to active system memory.

DELETE PRESET

When selected will delete the selected preset from the camera. It will not delete the selected preset from

the external media (1.8” SSD).

IMPORTANT: You will not be warned of the deletion nor asked to confirm this deletion. Be sure to

save your preset to the external media (1.8” SSD) for later use before deleting the preset from the

camera. Once you have deleted the preset, you will either need to create a new one or import and

existing one from external media.

You will be asked to confirm if you want to delete the preset. REDmote will also display this message

allowing you to respond.