Operation Manual

Version 2.0.5R1

68 68

For best results with Focus Confirm, operators should 'rock' the focus ring -- focusing through the point

of optimum focusing and back again in decreasing amplitude -- as when 'zeroing-in' for precision

manual focus.

AUTO FOCUS

NOTE: The following menus will ONLY appear if a RED EPIC Canon EOS Mount is installed with a

Canon lens attached.

With a RED EPIC Canon EOS Mount installed and a Canon EF Lens attached, available options become

MANUAL, CONFIRM, SINGLE, CONTINUOUS, TOUCH TRACK, and RACK. Default is MANUAL.

All settings except MANUAL places a single square (Center) or a single rectangle (Spot) on the screen

(depending on the ZONES selection) that indicate where the image is in focus.

Pressing the designated button for spot focus (REDmote / Side Handle button A default) will cycle you

through each Focus Mode option in order as you press the button repeatedly.

Performance of Auto Focus may be reduced under the following conditions:

• The subject is dark or distant.

• There is inadequate contrast between the subject and background.

• The scene has reflective highlights.

• The subject is backlit.

• There is inadequate surface contrast/detail inside the window.

NOTE: Edge Mode can be used for additional assistance in these conditions. Refer to SETTINGS

MENU > DISPLAY > TOOLS > EDGE.