Operation Manual

Version 2.0.5R1

223

7. Insert a T-10 Torx® screwdriver into the back focus adjustment screw. The screw is oriented at

approximately 80° as shown.

Performing Back Focus Adjustment – EPIC-M Shown, Scarlet-X Similar

8. Carefully and slowly, rotate the back focus adjustment screw to achieve optimum focus.

- Turning CLOCKWISE moves the sensor forward.

- Turning COUNTER-CLOCKWISE moves the sensor rearward.

NOTE: The center of the image will never be in perfect focus as the lines are less than 1/3 of a

pixel in size.

9. The back focus adjustment mechanism is self-locking, and does not require a supplementary locking

screw.

10. Install the screw-in plug in the back focus adjustment opening using a T-10 Torx driver.

11. This completes the RED SCARLET-X back focus adjustment.