Operation Manual

Version 2.0.5R1

181

2. REDmote will display the name (DEFAULT in this case) and MAC address (in parenthesis) of the

camera. This can take 20-30 seconds if RESCAN is selected, otherwise a cached list of cameras

found during the last search will be displayed.

NOTE: The MAC address after the name will ONLY be displayed if multiple cameras have the

same name.

NOTE: If more than one camera has been PAIRED with a REDmote, multiple cameras will be

listed.

NOTE: The camera name can be setup on the camera under SETINGS > SETUP >

COMMUNICATION. Select NAME and a keyboard will appear, allowing you to select the camera

name. This can also be performed after pairing the REDmote.

3. Select the desired camera and press the Enter button.