Operation Manual

Version 2.0.5R1
DECEMBER 20, 2011 ©2011 RED.COM INC.
115
TARGET
Commands can either be sent to ALL devices, to NONE of the devices (So this device will only listen) or
to a specific TARGET (Which can either be the NAME of a specific device or a whole GROUP). This
allows for a lot of flexibility in bigger setups. For example on a 3D shoot with multiple rigs one can either
send commands to individual cameras (Set CAM_A_L to 1/64th exposure), to a group of cameras (Set
"RIG_A" to 48 FPS), or to all cameras (Start Recording on all cameras). It is important to note that with
the exception of the NONE setting, all filtering is happening on the receiver side.
When selected a keyboard will appear.
SERIAL PROTOCOL
SCARLET-X can communicate to the outside world either via the Serial Port (RS-232, if RCP is selected
as the SERIAL PROTOCOL) or the Ethernet Port (Gigabit-Ethernet).
This menu allows the user to select the CTRL (RS232) Serial Port PROTOCOL. Available options are
NONE, ELEMENT TECHNICA, 3ALITY SPC 7100 and 3ALITY SPC 7000. Default is NONE.