Operation Manual

Version 2.0.5R1
DECEMBER 20, 2011 ©2011 RED.COM INC.
113
DATE / TIME
This menu allows the user to reset the battery backed up clock of the RED SCARLET-X camera. These
values will be used to timestamp each recording as they are made to the RED MAG 1.8” SSD media.
NOTE: Enter time in 24-hour clock format. i.e. 2:35 pm should be entered as 14:35:00.
COMMUNICATION
Communication Menu allows you to set a NAME, GROUP, TARGET, set a SERIAL PROTOCOL,
ENABLE DHCP, C2C or EXT, set an IP ADDRESS, NETMASK, and/or GATEWAY. This function also
allows you to identify the camera (NAME). With the serial port or a direct link Ethernet cable (Via UDP)
only two cameras or devices can be connected, if the camera is connected to a hub or router multiple
cameras or devices can communicate.