Owner manual

REDRAY PLAYER OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0017, REV-D | 11
MONITOR CONFIGURATIONS PORTS AND CABLES
DISPLAY TYPE AUDIO VID A VID B HDTV VID C VID D
4K (UHD) monitor:
One 4096 x 2160p or
3840 x 2160p monitor
HDMI 1.4
cable
HDMI 1.4
cable
HD monitor:
3840 x 2160p output scaled
to a 1920 x 1080p monitor
HDMI 1.4
cable
HDMI 1.4
cable
Four HD monitors:
Four 3840 x 2160p outputs
segmented and scaled to
four 1920 x 1080p monitors
HDMI 1.4
cable
HDMI 1.4
cable
(top left
monitor)
HDMI 1.4
cable
(top right
monitor)
HDMI 1.4
cable
(bottom left
monitor)
HDMI 1.4
cable
(bottom
right
monitor)
NOTE: Use only HDMI 1.4 cables (also known as HDMI High Speed cables) to connect your monitor(s) and audio
receiver to the REDRAY.
RECOMMENDED MONITOR SETTINGS
The out-of-the-box settings for many monitors are not optimized for 4K and HD content. Review your monitor’s
operation guide and settings to ensure your monitor is optimized for the best viewing experience possible.
When using REDRAY, RED recommends that you adjust your monitor’s image quality and image size/scaling
settings as described below.
IMAGE QUALITY
If applicable, RED recommends that you turn the following monitor settings to “Off” or “Zero”:
 Sharpness
 Motion enhancement settings, including any TruMotion
TM
or Motionflow
TM
settings
 Dynamic contrast (DC)
 Reality creation
NOTE: Settings may not be available on all monitors.