Manual

PRO I/O MODULE OPERATION GUIDE

RS232 PORT (AUX)

•10 pin interface fixed programmable function GPIO pins

•Regulated 12V power at nominal 750 mA

•RS232 remote camera control

LEMO EAG.1B.310.CLN

Facing PRO I/O MODULE

LEMO EAG.0B.305.CLN

Facing PRO I/O MODULE

TIMECODE (TCODE)

•Pin 5 is time code output

•This connector supports SMPTE Timecode input

and output

•Pins 2 and 3 may be used together to receive a

balance SMPTE 12M serial timecode input, or pin 2

may be used by itself (leave pin 3 open) to receive a

single-ended SMPTE 12M serial time code input

PIN DESCRIPTION

1 Camera Ground

2 Time code input - SMPTE single ended

3 Time code input - SMPTE double ended

4 48.00 KHz World Clock Output

5 Time code output

PIN DESCRIPTION

1 Camera ground

2 Primary RS232 TX

3 (+) 12V

4 GPO B - Programmable tally output

Default: “record complete”

When active, present 3.3 V @0.04 amps

maximum between pins 1 and 4

5 SW 2 - Programmable function trigger

Default: “record: toggle”

To activate, momentarily short pin 5 to 1

6 GPI - Programmable trigger input

Default: “record start/stop”

To activate GPI trigger, mometarily short pin 6 to 1

7 SW 1 - Programmable function trigger

Default: “go to playback”

To activate, momentarily short pin 7 to 1

8 Primary RS232 RX

9 Secondary RS232 TX

10 Secondary RS232 RX