User guide

Build 31 v31.6.16

80 80

REDCODE 36 REDFLASH 8GB REDFLASH 16GB RED-DRIVE

RED-RAM

REDMAG

2K 2:1 60 fps 60 fps 60 fps 60 fps

2K 16:9 60 fps 60 fps 60 fps 60 fps

2K ANA 60 fps 60 fps 60 fps 60 fps

3K 2:1 30 fps 30 fps 50 fps 60 fps

3K 16:9 30 fps 30 fps 50 fps 50 fps

3K ANA 50 fps 60 fps 60 fps 60 fps

4K 2:1 25 fps 30 fps 30 fps 30 fps

4K HD ---- 25 fps 30 fps 30 fps

4K 16:9 ---- 25 fps 25 fps 30 fps

4K ANA 25 fps 30 fps 30 fps 30 fps

4.5K WS ---- 30 fps 30 fps 30 fps

REDCODE 42 REDFLASH 8GB REDFLASH 16GB RED-DRIVE

RED-RAM

REDMAG

2K 2:1 ---- 60 fps 60 fps 60 fps

2K 16:9 ---- 60 fps

60 fps

2K ANA ---- 60 fps

60 fps

3K 2:1 ---- 30 fps 30 fps 30 fps

3K 16:9 ---- 30 fps 30 fps 30 fps

3K ANA ---- 30 fps 30 fps 30 fps

4K 2:1 ---- 25 fps 25 fps 25 fps

4K HD ---- 25 fps 25 fps 25 fps

4K ANA ---- 25 fps 25 fps 25 fps

4.5K WS ---- 25 fps 25 fps 25 fps

NOTE: Frame rates of “30” and “60” should be read as “29.97” and “59.94” respectively.

NOTE: An individual project should only use one Time Base, as it defines the frame rate used for

timecode and editing. To vary the capture frame rate above or below the base frame rate defined

by the project’s time base, enable VARISPEED in the SHUTTER menu.

NOTE: When in 2K, 3K or 4K ANA mode, RED EVF, RED LCD and PVW HD-SDI and HDMI outputs

will be stretched 2:1 horizontally to provide a 2.40:1 aspect ratio image display.

TIME BASE

Time base allows the user to set the project time base - the playback & editing frame rate. Default is

23.98.