Operation Manual

180 180

POWER UP

CONNECTED TO CAMERA

If the REDMOTE is physically attached to a camera, when the camera is powered up the REDMOTE will

automatically power up along with the camera.

NOT CONNECTED TO CAMERA

To manually power up the REDMOTE, slide and hold the Power / Key Lock Switch in the down direction

for 2 seconds, then release.

POWER DOWN

USING CAMERA

When REDMOTE is connected to the camera and the camera is powered down, the REDMOTE will also

power down. When disconnected from the camera, the REDMOTE will not power down with the camera.

USING REDMOTE

To power down REDMOTE, slide and hold the Power / Key Lock Switch in the down direction for 5

seconds.

Or slide and hold the Power / Key Lock Switch in the down direction momentarily, then release. A screen

will display with options to power down the REDMOTE, the Camera, or REDMOTE and Camera

together. Select the desired option and press the ENTER key in the REDMOTE Navigation Group.

NOTE: Wireless mode shown. When docked to camera, SHUTDOWN CAMERA is not displayed.