Operation Manual

COPYRIGHT © 2012 RED Digital Cinema 955-0002_v3.2, Rev-A1
136 136
CURRENT CALMAP
Calibration maps are stored in the camera. Due to the nature of the camera, different calibration maps
are needed for different situations.
Factory
This is the calibration map generated during production. This map is always present and selected as
default on first use after performing a system restore under SETTINGS > MAINTENANCE > RESTORE
SYSTEM.
User HS
The user can select the CURRENT CALMAP. The dialog only shows the calibration maps stored in
memory (FACTORY and USER HS in this case).
BLACK SHADING (DEFAULT)
This option uses fixed settings which are the same used for the factory calibration (around 23 Deg C).
BLACK SHADING (CURRENT FPS/EXPOSURE SETTINGS)
This option generates a calibration with the currently set frame rate/exposure. This can be used to
generate a calibration for long exposures. After calibration (Which takes about 10 min), the new map is
automatically selected.