Operation Manual
Table Of Contents
- RED EPIC® OPERATION GUIDE
- TABLE OF CONTENTS
- DISCLAIMER
- COMPLIANCE
- BEFORE YOU START
- THEORY OF OPERATION
- CAMERA OPERATIONAL CONTROLS
- BASIC OPERATION
- FIRST TIME USE – SETTING UP YOUR RED EPIC
- MENU CONTROLS
- MAIN MENU
- SECONDARY MENUS
- APPENDIX A: UPGRADING CAMERA FIRMWARE
- APPENDIX B: MANAGING DIGITAL MEDIA
- APPENDIX C: CHARGING BATTERIES
- APPENDIX D: INPUT / OUTPUT CONNECTORS
- APPENDIX E: REDMOTE OPERATION
- APPENDIX F: 3D SETUP / OPERATION
- APPENDIX G: EXPOSURE – USING FALSE COLOR AND ISO
- APPENDIX H: POST PRODUCTION
- APPENDIX I: TROUBLESHOOTING
- APPENDIX J: MAINTENANCE
- APPENDIX K: TECHNICAL DATA
- APPENDIX L: MENU MAPS
Version 1.4.0 SVN 29352 BETA
APRIL 19, 2011 ©2011 RED.COM INC.
67
DISK PRESETS
When IMPORT is selected, the selected preset will import from external media (1.8” SSD) to the camera.
Once imported the preset will be listed under CAMERA PRESETS.
NOTE: If no media is present on the external memory (1.8” SSD), this selection will remain Grayed
out (until a preset is exported of course).
You will then be asked if you want to apply the imported preset.
If No is selected, the preset will be imported and listed in the available Camera Presets.
If Yes is selected, “Preset Applied Successfully” will appear when successfully completed. The preset
will be listed in the available Camera Presets.
If the preset could not be applied, “Preset Could Not Be Applied” will appear to inform you.
APPLY
When APPLY is selected, the preset settings are transferred to active system memory.