Technical data

Version 3.0

212 212

NOTE: ****** are month xx + day xx + wildcard xx

When Master is set to LEFT, Slave is set to RIGHT and both Cam IDs are A, the first clip recorded is:

- Master: A001_L001_******.R3D

- Slave: A001_R001_******.R3D

If Master and Slave are both accidentally set to CENTER and both Cam IDs are different (Master = A /

Slave = B), the first clip recorded is:

IMPORTANT: This position is NOT recommended when recording in Master / Slave configuration.

- Master: A001_C001_******.R3D

- Slave: B001_C001_******.R3D

If Master and Slave cameras are both accidentally set to CENTER and still share the same CAM ID, the

first clip recorded on each camera will have the same general file structure, with the exception of the

two-wildcard characters, which provide full protection against file name duplication:

IMPORTANT: This position is NOT recommended when recording in Master / Slave configuration.

- Master: A001_C001_******.R3D

- Slave: A001_C001_******.R3D