Technical data

Version 3.0

209

16. Select “Disconnect” on the REDmote Upgrade Utility.

17. REDmote firmware upgrade is complete.

OPERATING MULTIPLE CAMERAS USING A SINGLE REDMOTE

To operate multiple cameras using a single REDmote, first the REDmote must be paired to multiple

cameras. Refer to OPERATION > WIRELESS CONNECTION for pairing instructions.

After pairing REDmote to the desired cameras, press Soft Menu Button 1 for CONNECT. Available

cameras will be listed to connect with wirelessly.

Select the camera you wish to control and press the ENTER button. When you want to switch to a

different camera, press Soft Menu Button 1 again to list available cameras and re-select. The above

image is shown for reference only. The MAC address will only display if two or more cameras have the

same name.