Manualshelf

Technical data

ManualsBrandsRED ManualsCamcordersDSMC
151152153154155156157158159160
Version 3.0
955-0003_V3.0, REV-A ©2011-2012 RED.COM INC.
159
APPENDIX C: CHARGING BATTERIES
REDVOLT
BATTERY LED ARRAY
The REDVOLT battery LED array consists of three (3) LED’s and a button.
REDvolt LED Array
When button is pressed, LEDs will illuminate in relation to battery life available (in 33.3% steps). If single
LED blinks or no LEDs illuminate when pressed, battery requires charging.
BATTERY PERFORMANCE
When fully charged to 16.4V (+/- 0.2V), the REDVOLT battery is designed to provide approximately 30-
45 minutes of operational time when powering in the RED SCARLET-X camera (this may vary depending
on installed accessories and loads).
DISCHARGE PROTECTION
The battery is equipped with discharge protection. When battery voltage reaches lower than 10V (+/-
0.12V) the battery stops supplying output voltage (discharging).