Manualshelf

Technical data

ManualsBrandsRED ManualsCamcordersDSMC
121122123124125126127128129130
Version 3.0
955-0003_V3.0, REV-A ©2011-2012 RED.COM INC.
125
NETWORK
If the Ethernet connection is used, additional settings are required. Each Device requires a unique IP
ADDRESS. (Technically, with the camera-to-camera cable using UDP this is not required but good
practice). For simple camera-to-camera communication via UDP, all devices need to be in the same
sub-net. (Need the same NETMASK and GATEWAY and the first 3 parts of the IP address need to be
the same.
DHCP
If a DHCP-server is available in the network the DHCP option can be checked and the camera will obtain
the IP address, Netmask and gateway automatically from the DHCP -server.
C2C
If the camera-to-camera (C2C) check box is checked, changes to the settings on this camera will be
sent out via the network as UDP packets as a SET command (Which then sets the property on other
cameras). SET commands send to this camera will not be propagated.)
EXT
If the EXT check box is checked this camera can be controlled via TCP/IP from an external device.
IP Address
Permits the user to adjust the camera’s static IP address.
Netmask
Permits the user to adjust the Subnet Mask address.
Gateway
Permits the user to adjust the Gateway address.