Instruction Manual

RED DSMC OPERATION GUIDE

CONTROLS, CONNECTORS, AND LEDS

This section describes the REDMOTE controls, connectors, and color LCD display.

The following table describes default REDMOTE control actions. Each control is also programmable.

# REDMOTE CONTROL DESCRIPTION

1 Stills/Motion Switch N/A; Currently disabled

2 Release Buttons Press and hold to undock the REDMOTE

5 Rocker Switch Up: Iris open; Down: Iris close

6 User Function Keys Go to “Default Key Functions” on page 205

7 Menu Button Toggle between basic and advanced DSMC menus

8 Soft Menu Buttons (1-3) Go to “Soft Menu Buttons (1-3)” on page 142

9 Soft Menu Buttons (4-8) Go to “Customize REDMOTE Setting Menus” on page 145

10 Navigation Group Go to “Navigation Group” on page 142

11 Focus/Record Button Half press initiates auto focus; full press toggles record start/stop

12 Power/Lock Switch Go to “Power/Key Lock Switch” on page 142

13 Mini-USB Power Port Charges the internal battery; upgrade firmware

For a full list of default user key actions for the REDMOTE, go to “Default Key Functions” on page 205.

COMPATIBLE CABLE

 790-0230: RED Mini-USB-to-USB cable

REDMOTE LEDS

There are two (2) status LED indicators located above the rocker switch on the left side of the LCD display.

# REDMOTE LED COLOR/FLASHING DESCRIPTION

3 Power/Recording LED Red Camera startup; camera recording

4 Status/Connectivity LED Green Camera ready; REDMOTE connected

Green flashing Searching/Establishing communication

REDMOTE