Specifications
COPYRIGHT © 2012 RED Digital Cinema 955-0002_v3.2, Rev-A1
80 80
MODE
MANUAL FOCUS
To adjust the MODE parameter, select the Menu box and use the UP / DOWN arrows to adjust.
Available options are MANUAL and CONFIRM. Default is MANUAL.
MANUAL
When selected all focus operations are manual.
CONFIRM
Enables the Center or Spot focus square for use with manual focus. This mode provides additional
focus assistance to the photographer using RED, YELLOW, and GREEN color changes to the focus spot
window. Inadequate subject illumination and/or contrast may interfere with normal Focus Confirm
operation.
For best results with Focus Confirm, operators should 'rock' the focus ring -- focusing through the point
of optimum focusing and back again in decreasing amplitude -- as when 'zeroing-in' for precision
manual focus.
AUTO FOCUS
NOTE: The following menus will ONLY appear if a DSMC Canon Mount is installed with a Canon
or Sigma lens attached.
With a DSMC Canon Mount installed and a supported lens attached, available options become
MANUAL, CONFIRM, SINGLE, CONTINUOUS, TOUCH TRACK, and RACK. Default is MANUAL.
All settings except MANUAL place a single square (Center) or a single rectangle (Spot) on the screen
(depending on the ZONES selection) that indicate where the image is in focus.
Pressing the designated button for spot focus (REDMOTE / Side Handle button A default) will cycle you
through each Focus Mode option in order as you press the button repeatedly.