Specifications

181

RECORDING

• To record, press the Red REC (record) button. If media is connected and properly formatted, the

upper LED will illuminate Red and the Timecode value displayed in the LCD will change to Red text.

To stop recording, press the REC button a second time. After recording to media is completed, the

upper LED will go out and the Timecode value displayed in the LCD will change back to White text.

Note: If media is NOT connected when record is requested, the REDMOTE LCD and camera

VIEWFINDER (MENUS) output will indicate “NO MEDIA ATTACHED”.

ACCESSING CAMERA CONTROLS / SETTINGS

The Navigation Group is used to navigate through camera menus. Refer to CAMERA OPERATIONAL

CONTROLS > REDMOTE > NAVIGATION GROUP. The camera settings and status are displayed on the

REDMOTE LCD. Refer to BASIC OPERATION > GRAPHICAL USER INTERFACE AND NAVIGATION >

REDMOTE.