Specifications

955-0002_v3.2, Rev-A1 COPYRIGHT © 2012 RED Digital Cinema
125
DATE / TIME
This menu allows the user to reset the battery backed up internal clock of the camera. This time value is
used as a timestamp on the .R3D files when recording to the RED MAG 1.8” SSD media.
NOTE: Enter time in 24-hour clock format. i.e. 2:35 pm should be entered as 14:35:00.
COMMUNICATION
Communication Menu allows you to set a unique identification for the camera (or a group of cameras)
when operating in command and control communications network. Parameters are NAME, GROUP,
TARGET, set a SERIAL PROTOCOL, ENABLE DHCP, C2C or EXT, IP ADDRESS, NETMASK and
GATEWAY. Using the serial port or a direct Ethernet interconnect, two cameras, or one camera and one
external device can be connected. If the camera is connected via Ethernet to a hub or router, multiple
cameras and devices can communicate to each other.
NAME
Allows the user to create a unique camera NAME used in network communications
Note: the camera name field is limited to 8 characters.