Specifications

RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC
955-0020_V5.2, REV-C | 95
The table below describes the lower controls in Playback mode.
# CONTROL DESCRIPTION
1 Playback/Record toggle Toggles between Record mode and Playback mode.
2 Histogram Displays the clip histogram. The histogram changes based on any chang-
es made to the Look settings. For more information about Looks, go to
“Looks” on page 105.
When using the touchscreen, touching the histogram displays the Tools
menu.
3 Load Previous Clip Loads the previous clip in the playlist.
4 Frame-by-Frame Reverse Moves through the clip frame-by-frame in reverse.
5 Reverse Play/Pause toggle Plays clip in reverse, and toggles between play and pause.
6 Play/Pause toggle Toggles between play and pause.
7 Frame-by-Frame Forward Moves through the clip frame-by-frame.
8 Load Next Clip Loads the next clip in the playlist.
9 Play Options Displays the following subset of options: Play Once, Loop, Loop Playlist,
and Playback Speed.
10 Play Once Plays clip to the end, and does not repeat the clip.
11 Loop Plays the clip on a loop.
12 Loop Playlist Loops all clips in the playlist. To create a playlist, go to Menu > Playback >
Menu > Media, and move clips to the Play List field.
13 Playback Speed Allows you to select x1, x2, x4, x8, or x16 playback speed.
14 Marker Options Displays the following subset of options: In Point, Remove In/Out Point,
Out Point, Previous Marker, and Next Marker.
15 In Point Sets a red In Point marker in the Playback Status Bar. Use an In Point
marker in conjunction with an Out Point marker to play only a certain por-
tion of a clip. The In/Out Point markers help when the clip is long and you
want to focus on a particular segment.
16 Remove In/Out Point Removes the In/Out Point markers and skips to the end of the clip.
17 Out Point Sets a red Out Point marker in the Playback Status Bar. Use an Out Point
marker in conjunction with an In Point marker to play only a certain por-
tion of a clip. The In/Out Point markers help when the clip is long and you
want to focus on a particular segment.
18 Previous Marker Goes to the previous marked frame, which displays as a red line in the
Playback Status Bar. Disabled when there are no marked frames.
19 Next Marker Goes to the next marked frame, which displays as a red line in the Play-
back Status Bar. Disabled when there are no marked frames.
20 Clip/Camera Information Indicate if clip was recorded in HDRx, the current camera power status,
and audio input signals.