Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.2, REV-C | 51

10. Add all of the items to the overlay.

11. After setting up your overlay, select Create or Save.

The new overlay displays in the Camera list.

NOTE: Except for the Custom Label (LBL), you can only add each element once. If you add an element you have

already added to the overlay, the element will move to the new position.

PRIORITY

The camera can only have a single control monitor which allows you to interact with the camera settings.

The order of the list determines which monitor is the control monitor.

The monitor that has highest priority (is closest to the top of the list) and is set to Overlay mode in the Monitor

Control screen is the control monitor. For more information about changing the monitor mode, go to “Mode”

on page 49.

To change the order of the monitors in the list, select a monitor and use the Up and Down buttons to move the

monitor up and down, respectively.

BRIGHTNESS

You can control the brightness of each of your LCDs and EVFs. Slide to the right for a brighter display; slide

to the left for a dimmer display.

NOTE: A rear LCD/EVF is one that is plugged into any rear RED module, such as the +1 ADAPTOR MODULE or

the PRO I/O MODULE.

ADVANCED

GESTURES

 Pinch to Magnify: Use two fingers to pinch inward OR slide apart on the LCD to toggle 1:1 Magnify. For more

information about 1:1 Magnify, go to “Magnify” on page 47.

 Double-Tap Right 25% to Record: Double-tap the right 25% of the video area on the LCD to toggle record.

 Double-Tap Left 25% to Start AF: Double-tap the left 25% of the video area on the LCD to start autofocus

when compTatible lenses are used. For a list of compatible lenses, go to “Supported Lenses” on page 133.

OTHER

 Lock Touch Screen: Touches to the LCD are locked out. To unlock, touch the screen and follow the on-screen

instructions.

 Use Small Dialogs on 9" LCD: The dialogs on the RED TOUCH 9.0" LCD are smaller than the default dialogs.

THEME

The selected graphical user interface theme will affect the look of all in-camera menus. Select a theme by ac-

cessing the Advanced menu at Menu > Settings > Display > Monitor Control > Advanced.

The following color themes are available for the graphical user interface:

 Original: Light gray menu backgrounds, black text, light-blue topic highlights

 RED: Dark gray menu backgrounds, white text, red topic highlights

DISPLAY MODES

Settings in this screen determine how different settings display on the main screen.

The modes are separated into two (2) tabs:

 Camera

 Lens