Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.2, REV-C | 129

TRIGGER BUTTON CIRCUIT

NOTE: A 3BNC-TO-00 SYNC CABLE (P/N 790-0154) SYNC interface cable is available from RED Digital Cinema:

‒ White BNC: Shutter Sync/GPI

‒ Yellow BNC: SMPTE Timecode

‒ Green BNC: RS170A Genlock

CTRL (RS232 CONTROL)

A 4-pin LEMO connector supports RS232 remote control for 3D camera communication, and third party meta-

data ingest applications.

The shutter Sync Output signal acts as an immediate response hardware tally of a scan. This is useful for 3D

or motion control applications where a slave camera or lighting device needs to be synchronized to a master

camera.

Alternatively, this output pin may be used as a GPO (General Purpose Output) tally, whose function is pro-

grammed in the USER KEYS menu. Default function for the General Purpose Output is Record Tally.

PIN SIGNAL DESCRIPTION

1 GROUND Common Ground

2 232 RX RS232 RX

CTRL (RS232) Connector

Mating Connector: FGG.00.304.CLAD27Z