Manual

RED DSMC POWER OPERATION GUIDE

955-0038, REV-F | 19

+1 ADAPTOR MODULE CONNECTIONS

# CONNECTOR CONNECTOR TYPE CONNECTOR FUNCTION

1 Mounting 1/4-20 mounting Supports bolt-on auxiliary equipment

2 EVF/LCD

N/A Custom digital video and power interconnection between the

BRAIN and RED EVF or LCD; Pinout not published

3 Auxiliary power

out (PWR)

4-pin 0B LEMO Supplies unregulated (+) 11.5 to 17 V battery pass-through;

Connect to 2-pin LEMO accessories with RED 4-Pin to 2-Pin

Adaptor Cable; Max sustained current is 2 A

4 REDMOTE

dock

connector

8-point POGO

connector

Power and support for the REDMOTE

5 Dock connector SEARAY connector Supports power and communication with modules

1. DO NOT use the EVF/LCD port on the +1 Adaptor Module if a Pro I/O Module is connected to the DSMC BRAIN. The Pro I/O Module

overrides the EVF/LCD and AUX power out ports when connected.

NOTE: The default auxiliary power output setting is on. Use the on-screen menu to toggle this setting ON/OFF.

In the menu screen, go to: Power > Power Out > +1 PWR. After a DSMC firmware upgrade or factory reset, the

default auxiliary power output setting is turned on. Thereafter, the last power output setting is restored.

+1 Adaptor Module