Specifications

955-0002_v3.3, Rev-B COPYRIGHT © 2012 RED.cm, Inc.
127 127
PRIORITY
The monitor priority determines the priority in which the monitors will become the control surface.
Note: There can only be one control surface active at any given time.
TEST SIGNALS
Permits the video monitor outputs to be replaced with a video test pattern. Available test patterns are
CHIP CHART and SMPTE BARS.
To enable a desired test signal, select the desired test signal box. To exit the test signal, tap the
touchscreen one time or press the Enter or Menu button on the Side Handle or REDMOTE.
CHIP CHART
SMPTE BARS
NOTE: RED DSMC test signals are not recordable, they are provided to help align external video
monitors connected via the HD-SDI or HDMI outputs.