Specifications

120 120 120 120

TIME CODE

TIME CODE DISPLAY

Time Code Display allows you to choose between Time of Day (TOD) and Edge display. In TOD mode,

the time runs continually. With edge display, the time code starts and stops coincident with recording.

TIME CODE SOURCE

Selects the TIME CODE source to be used. Available options are USER PROVIDED, EXTERNAL: BRAIN,

and EXTERNAL: REAR MODULE.

TIME CODE

SOURCE

MODE COMMENTS

User Provided

(Internal)

Real Time

Clock (RTC)

When selected the camera uses the cameras Real Time Clock as the time code counter source

(snapshot of the RTC.)

Set Manually When selected allows the user to define a custom value as the time code counter seed.

The three numerical boxes below allow you to set hours, minutes and seconds (in that order).

External: Brain

Varies by

device

Uses the generated by and external device connected to an input on the camera brain

External: Rear

Module

Varies by

device

Uses the generated by and external device connected to an input on a rear module such as the

RED PRO I/O MODULE

Time Code and HANC data

The time code displayed becomes the primary time code HANC data while the other time code

is sent as secondary.