Specifications

RED DSMC OPERATION GUIDE

TIMECODE

For more information about timecode, go to “Timecode, Genlock, Multi-Camera Setup” on page 146.

TIMECODE SOURCE MODE DESCRIPTION

User Provided (Internal) Use Real Time Clock

(RTC)

Uses the internal Real Time Clock as the timecode counter

source. You can set the hours, minutes, and seconds in the

numerical boxes on the screen.

Set Manually Define a custom value as the timecode counter seed. Set

the hours, minutes, and seconds in the numerical boxes on

the screen.

External: Brain Varies by device Uses the timecode from an external device connected to

the timecode connector on the BRAIN.

External: Rear Module Varies by device Uses the timecode from an external device connected to a

Pro I/O Module or a 4K Broadcast Module.

SLATE

Use the Slate menu to add metadata to clips. After configuring the following fields, the information populates

in the Media menu when formatting media:

 Cam ID

 Cam Pos

NOTE: The scene name is limited to eight (8) characters.

AUTO-INCREMENT TAKE

To automatically increment the take number when the camera stops recording, follow the instructions below:

1. Go to Menu > Settings > Project > Slate > Scene.

2. Enter a value in the Take box.

AUTO SLATE

Frame values for Head Slate and Tail Slate on the Auto Slate tab, these values only show in-camera. The Head

Slate and Tail Slate metadata values are currently disabled in REDCINE-X PRO.