Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.2, REV-K | 132

PRE-AMP

The pre-amplifier range is 30 dB to 60 dB. The default is 32 dB. To adjust amplification levels, follow the

instructions below:

1. Go to Menu > Settings > Audio > Pre-Amp.

2. Move the Pre-Amp (pre-amplifier) sliders up and down to adjust the amplification levels.

NOTE: To link the amplification for each channel, go to Menu > Settings > Audio > Channel and select the Gain

Sliders check box. For more information, go to “Link” on page 131.