Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.2, REV-K | 112

SELECT OLPF TYPE (IF YOU HAVE THE DSMC INTERCHANGEABLE OLPF SYSTEM)

If your DSMC has the DSMC Interchangeable OLPF system, then you must select the correct OLPF type that

is installed.

Select your OLPF type by following the instructions below:

1. Go to Menu > Settings > Maintenance > OLPF.

2. Select your OLPF type from the Type drop-down menu:

IMPORTANT: Ensure the correct OLPF type is selected from the drop-down menu. Failure to select the

correct OLPF type will affect color accuracy.

NOTE: If you are unsure which OLPF is installed, go to “Verify Installed OLPF” on page 44.