User guide

COPYRIGHT © 2014 RED.COM, INC
RED 4K BROADCAST MODULE OPERATION GUIDE
955-0072, REV-D | 16
6. Set up the genlock source in the camera:
A. Go to Menu > Settings > Setup > GPIO/Sync.
B. Select Rear Module from the Genlock Source drop-down menu.
The GEN indicator in the Lower Status Row illuminates green.
ENABLE A TEST PATTERN
1. Go to Menu > Settings > Display > 4K Broadcast.
2. Select Test Pattern from the right Output drop-down menu.
The SDI ports output SMPTE color bars.
3. To switch back to the video feed, select Video from the right Output drop-down menu.