Owner's manual

RED 3-AXIS SYSTEM OPERATION GUIDE

955-0044, REV-D | 64

RED LENS CONTROL MOTOR CABLE (3.3KΩ VERSION)

The RED Lens Control Motor Cable (3.3KΩ Version) provides a 7-pin 1B to 7-pin 1B LEMO cable used to con-

nect RED Lens Control Motors to compatible third-party motor drivers. This cable provides a 3.3k ohms (Ω)

resistance identification to the motor driver. Cables are available in 18" and 24".

NOTE: The RED Lens Control Motor is also compatible with third-party systems using the appropriate RED mo-

tor cable with the proper internal identification resistor.

NOTE: For more information, go to “Compatible Motor Drivers” on page 54, or visit the RED Store at http://

www.red.com/store.

W.M.D. LENS CONTROL MOTOR

FGG-1B.307.CLAD62Z FGG-1B.307.CLAD62Z

PIN SIGNAL WIRING PIN SIGNAL

1 Motor (+) 1-1 1 Motor (+)

2 Motor (-) 2-2 2 Motor (-)

3 Encoder A 3-3 3 Encoder A

4 +5 V 4-4 4 +5 V

5 GND 5-5 5 GND

6 Encoder B 6-6 6 Encoder B

7 Motor ID 7-7 7 Motor ID

RED Lens Control Motor Cable

(3.3KΩ VERSION)