Owner's manual

RED 3-AXIS SYSTEM OPERATION GUIDE

3-AXIS SYSTEM CABLES

RED W.M.D. MOTOR CABLE (FOCUS, IRIS, ZOOM)

The RED W.M.D. Motor Cable is a 7-pin 1B to 7-pin 1B LEMO cable used to connect RED Lens Control Motors

to the W.M.D. Cables are available in 12", 18", and 24".

NOTE: The RED Lens Control Motor is also compatible with third-party systems using an appropriate RED motor

cable with the proper internal identification resistor. For more information, visit the RED Store at http://www.

red.com/store or contact your Bomb Squad representative.

W.M.D. LENS CONTROL MOTOR

FGG-1B.307.CLAD62Z FGG-1B.307.CLAD62Z

PIN SIGNAL WIRING PIN SIGNAL

1 Motor (+) 1-1 1 Motor (+)

2 Motor (-) 2-2 2 Motor (-)

3 Encoder A 3-3 3 Encoder A

4 +5 V 4-4 4 +5 V

5 GND 5-5 5 GND

6 Encoder B 6-6 6 Encoder B

7 Motor ID 7-7 7 Motor ID

RED W.M.D. Motor Cable (12")