Owner's manual

RED 3-AXIS SYSTEM OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0044, REV-D | 57
W.M.D. START/STOP/TALLY EXPANSION CONNECTOR
The W.M.D. Start/Stop/Tally expansion connector is a 14-pin 1B connector that provides expansion (EXP) sup-
port for the RED 3-Axis Lens Control System.
1 10
5
6
4
7
2 9
13
11
3
8
1412
14-PIN 1B LEMO START/STOP EXPANSION CONNECTOR
PIN SIGNAL
1 GND
2 232_Rx
3 +12 V
4 232_TX
5 Momentary
Start/Stop
6 EPIC Tally
7 EPIC Start/Stop
8 AUX GPIO 1_3.3
9 +3.3 V
10 Cable ID
11 -
12 AUX GPIO 2_3.3
13 -
14 -
W.M.D. 14-Pin Start/Stop and Tally
connector