Owner's manual

RED 3-AXIS SYSTEM OPERATION GUIDE

955-0044, REV-D | 55

This appendix provides RED 3-Axis Lens Control System pinout information for the Wireless Motor Driver,

Tactical Hand Controller, Lens Control Motor as well as RED

connector cables that are used with the system

components.

NOTE: When connecting a cable to a connector, align the key and red marker on the cable connector with the

corresponding key and marker on the device connection.

NOTE: Connector diagram images are for reference only. Diagrams are not to scale.

W.M.D. CONNECTORS

# CONNECTOR CONNECTOR TYPE CONNECTOR FUNCTION

1 FOCUS 7-pin 1B LEMO Lens motor drive support; Focus control knob on T.H.C.

2 IRIS 7-pin 1B LEMO Lens motor drive support; Iris control knob on T.H.C.

3 ZOOM 7-pin 1B LEMO Lens motor drive support; Zoom control slider on T.H.C.

4 CAN 4-pin 0B LEMO CAN communication and power for the T.H.C.

5 EXP 14-pin 1B LEMO Start/Stop, Tally, RS-232, GPIOs

6 232/422 10-pin 1B LEMO RS-232/422 communication

7 PWR 2-pin 1B LEMO 12 V to 18 V power

W.M.D. Connections

CONNECTOR AND

CABLE PINOUTS