Owner's manual

RED 3-AXIS SYSTEM OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0044, REV-D | 35
# LED COLOR/FLASHING DESCRIPTION
4 Battery/Tally
1
Green Charged battery
Amber Low battery
Red Very low battery (replace immediately to avoid power loss)
Flashing Tally on; camera is recording
Solid Tally off; camera is not recording
5 Initialize Off One or motor motors must be initialized; no motors detected
Green flashing Initialization in process
Green All detected motors are initialized
6 Power Off Power off
Green Power on
7 Zoom Limit Off Function active; no limits set
Green flashing (slow) Actively setting limit (User is holding the limit button down)
Green flashing (fast) Function locked: no position updates are sent to the W.M.D.
Green Limit is enabled
1. The tally feature is only supported with specific cabling configurations. Refer to “Configure Start/Stop, Genlock, TimeCode, Tally” on
page 27.