Owner's manual

RED 3-AXIS SYSTEM OPERATION GUIDE

955-0044, REV-D | 16

W.M.D. OVERVIEW

The RED

Wireless Motor Driver (W.M.D.) is the brain of the RED 3-Axis Lens Control System. The W.M.D.

receives control signals from the RED Tactical Hand Controller (T.H.C.) to drive up to three (3) RED

Lens Control MotorS. With the W.M.D., you can adjust the following settings for each motor:

 Torque

 Direction

 Type/Model

 Backlash

 Endstop

R3D metadata integration is a standard on the W.M.D., allowing your recorded lens control information to carry

over into post-production. Expansion ports, tool-free installation, and start/stop connectivity make the W.M.D.

versatile and easy-to-use.

NOTE: DO NOT USE the Pro I/O Module to power the RED W.M.D. The Pro I/O Module does not provide enough

power and is not designed to support the W.M.D.

NOTE: For more information on compatibility, go to “3-Axis System Compatibility” on page 54.

NOTE: Go to the RED Downloads page at www.red.com/downloads for the latest firmware version, operation

guide, and other support resources.

RED W.M.D.

WIRELESS MOTOR

DRIVER (W.M.D.)