User Manual

5
ENG
2 Location
The first step in setting up the REEFER
™
is to choose a suitable location.
Weight
The flooring directly below the system must be rated to support the
following weight:
Approximate total weight of system including water
Model Nano 170 G2 200 G2 250 G2 300 G2 350 G2
Weight 180kg/
400lb
275Kg/
607lb
315kg/
695lb
380Kg/
840lb
470kg/
1035lb
530kg/
1170lb
Model 425 G2 525 G2 625 G2 750 G2 900 G2 P500 G2 P650 G2
Weight 690kg/
1520lb
850kg/
1875lb
930kg/
2060lb
1110kg/
2460lb
1300kg/
2870lb
760kg/
1680lb
940kg/
2080lb
Model S 850 G2 S 1000 G2
Weight 1210kg/
2675lb
1465kg/
3240lb
Room temperature
Site selection is important for correct temperature maintenance.
We recommended that you keep the ambient room temperature a
comfortable and stable 22°C / 72°F. Avoid placing the tank in front of
an air conditioner, heating vents or direct sunlight. A well ventilated
room with moderate light is the best place to position the aquarium.
Accessibility
Ensure that there is at least 10cm / 4” of clearance behind the
REEFER
™
to allow easy access for installing/removing cables
from the sump as well as sufficient air circulation for a chiller
(larger models only). It is recommended to leave approximately
60cm/24” between one of the sides of the aquarium and any
adjacent walls or furniture for access to the rear of the tank.
General considerations
Ensure that the area surrounding the aquarium is waterproof and
consider moving away anything that water might damage or may be
corroded by the salt.
NOTE: The REEEFER
™
system should not be moved when full of water.