User Manual

23
MIDI CC Value Transposition MIDI CC Value Transposition
59 -P4 83 octave + P5
60 -M3 84 octave + m6
61 -m3 85 octave + M6
62 -M2 86 octave + m7
63 -m2 87 octave + M7
64 Unison 88 2 octaves
Loop / Sample (MIDI CC 87)
You can use MIDI CC 87 to record, overdub, loop, and trigger samples. When loop playback is stopped,
no wet (processed) sound will be heard. The blend control is still active, so no sound will be heard when
playback is stopped if the blend control is set to 100% wet.
Combine this with Loop Decay (CC 25) to make previous loops gradually fade out during overdubbing.
If you want to automate this from a sequencer or DAW, it is best to use discrete continuous controller
messages or breakpoints instead of ramps.
MIDI Program Change Messages
The Tensor can store 31 presets for recall via MIDI program change messages. You can store the current
setting as a preset using SYSEX or the TouchOSC template available on our web site.
You can also save a preset by holding down both the HOLD and ON footswitches for several seconds,
then sending a MIDI program change message. That allows you to store a preset using a MIDI foot con-
troller or another device that cannot sent system exclusive messages.