User Manual

19
Using MIDI
Your pedal supports USB MIDI (in/out) and 1/4" TRS MIDI (input only).
USB MIDI
Your pedal is a class-compliant USB device, which allows you to:
• Control all parameters
• Access additional hidden parameters
The pedal can work with any USB MIDI host, including:
• Macintosh and Windows computers. The pedal shows up as a MIDI device and is available to all pro-
grams.
• Apple iPad, iPod touch, and iPhone using the Lightning to USB 3 Camera Adapter.
• Standalone USB MIDI hosts allow you to connect the Tensor to hardware with 5-pin DIN MIDI connec-
tors without the use of a computer. Examples include:
iConnectivity iConnectMIDI4+
iConnectivity mio4
Disaster Area Designs Gen3 MIDI controllers with their gHOST option
Kenton MIDI USB Host MkII
MidiPlus USB MIDI Host
See our Knowledge Base for up-to-date information
The pedal sends and receives on MIDI channel 1 by default. You can change the MIDI channel using MIDI
System Exclusive messages or our web-based editor. The MIDI channel is remembered when power is
o. See “Using MIDI” on page 19 for more information.
TRS MIDI Input
See “Control Input” on page 15 for information about configuring TRS MIDI. Only MIDI input is support-
ed, so you can use the web editor to change parameters and configuration settings, but it will not show
the current state of the pedal.