User Manual

Red-M 1000AP getting started guide
14
Using Identify mode
Identify mode makes the 1000AP’s LED flash red and
orange so you can identify which 1000AP corresponds to
which entry in the management interface. This is
especially useful when you need to find a 1000AP
amongst many installed in a building.
Identify mode is also useful when identifying errors from
the management interface and discovering which users
are connected to a 1000AP.
To enable Identify mode:
1. In the AP List dialog, click on the checkbox (or
boxes) to select the 1000APs you want to identify.
2. Choose Start identifying selected APs from the
Select action drop-down list to enable Identify
mode.
3. To end Identify mode, choose End identifying
selected APs from the Select action drop-down
menu.