Manual

ORDERING INFORMATION
Note: Output Modules are NOT supplied with the controller. When specifying the controller, be sure to purchase the
appropriate output module for the Main Control Output and if necessary, the alarm output(s) and cooling output.
The controller can be fitted with any combination of output modules that do not have the RS485 option.
The Logic/SSR Drive Module is a switched DC source, intended to drive the DC input of an SSR power unit. It
should never be connected to a line voltage.
All modules are shipped separately and must be installed by the user.
7
MODEL NO DESCRIPTION
Type 4X/IP65
BEZEL
4 to 20 mA
ANALOG OUTPUT
0 to 10 VDC
ANALOG OUTPUT
ALARM
OUTPUTS
COOLING
OUTPUT
RS485 COM PART NUMBER
TSC
Temperature
Setpoint
Controller
NO YES NO 2 NO NO TSC01001
YES YES NO 2 NO NO TSC11001
YES YES NO 1 YES NO TSC11002
YES YES NO 2 NO YES TSC11004
YES YES NO 1 YES YES TSC11005
YES NO YES 2 NO YES TSC12004
YES NO YES 1 YES YES TSC12005
Relay Module OMD00000
Triac Module OMD00001
Logic/SSR Drive Module OMD00003
PMK5 Panel Mount Adapter Kit (1/4 DIN to 1/8 DIN) PMK50000
RLY
45 A Single Phase Panel Mount SSR RLY50000
25 A Single Phase DIN Rail Mount SSR RLY60000
40 A Single Phase DIN Rail Mount SSR RLY6A000
25 A Three Phase DIN Rail Mount SSR RLY70000
These models have dual alarm outputs, or single alarm with secondary outputs, with shared common terminals (Form A Type). As a result, these outputs
should be fitted with the same type of output module. The main output (OP1) may be fitted with any type of output