Instruction Manual

-87-
MODEL
NO.
DESCRIPTION
NEMA
4X/IP65
BEZEL
4to20mA
ANALOG
OUTPUT
0to10VDC
ANALOG
OUTPUT
ALARM
OUTPUTS
COOLING
OUTPUT
RS485
COM
PART NUMBER
TSC Temperature Setpoint Controller NO YES NO 2 NO NO TSC01001
YES YES NO 2 NO NO TSC11001
YES YES NO 1 YES NO TSC11002
YES YES NO 2 NO YES TSC11004
YES YES NO 1 YES YES TSC11005
YES NO YES 2 NO YES TSC12004
YES NO YES 1 YES YES TSC12005
Relay Module OMD00000
Triac Module OMD00001
Logic/SSR Drive Module OMD00003
PMK5 Panel Mount Adapter Kit (1/4 DIN to 1/8 DIN) PMK50000
RLY5 SSR Power Unit RLY50000
RLY6 Single Phase 25 A DIN Rail Mount Solid State Relay RLY60000
RLY6A Single Phase 40 A DIN Rail Mount Solid State Relay RLY6A000
RLY7 Three Phase DIN Rail Mount Solid State Relay RLY70000
These models have dual alarm outputs, or single alarm with cooling outputs, with shared common terminals (Form AA Type). As a result, these outputs should be
fitted with the same type of output module. The main output (OP1) may be fitted with any type of output module.
Note: Output Modules are NOT supplied with the controller. When specifying the controller, be sure to purchase the appropriate output module for the Main Control Output
and if necessary, the alarm output(s) and cooling output. The controller can be fitted with any combination of output modules that do not have the RS-485 option.
The Logic/SSR Drive Module is a switched DC source, intended to drive the DC input of an SSR power unit. It should never be connected to a line voltage.
All modules are shipped separately and must be installed by the user.
APPENDIX “G” - ORDERING INFORMATION